Order Can Am Dual Battery Kit Right Now Online

Surprising fact: an extra 18 amp hours on a UTV can transform long-ride lighting and audio use. That extra capacity lets accessories run longer while your starter stays protected.

A purpose-built 80A isolator links both batteries Key ON and isolates the starter Key OFF so accessories pull from the second battery. Its heavy-duty mount resists vibration/impacts for real off-road use.

Expect a fresh, sealed AGM that ships fully charged with hardware sized for your specific vehicle. The customized lifted 4 wheeler setup needs no daily maintenance, though a charger or maintainer is recommended to prevent sulfation and extend life.

Shop online for clear fitment and fast delivery so a customer can move from order to install with minimal downtime. It preserves stock starting power yet adds usable amp-hours for winches, lights, and stereo on any trail.

Why Choose a Can-Am Dual Battery Kit for Your Next Adventure

If you run lights and audio late, a second power source keeps the starter prepared. An 80A isolator ties both batteries Key ON and isolates the starter Key OFF so accessories pull from the aux cell, not the stock one.

Use accessories freely and preserve your stock battery

Run light bars, audio, GPS, and cabin heat while keeping the starter untouched. The accessory supply supplies steady voltage for sensitive electronics, reducing dimming and voltage dips when loads spike.

Confident cranks with stock starting kept intact

An isolator-managed system preserves the stock battery so cranking stays strong after long accessory use.

• Extra reserve: The auxiliary cell adds amp-hour reserve for high-draw gear on trail or at camp.
• Reduced strain: Accessory offload eases stress on starter circuits and components.
• Automatic management: No manual switching required—system behavior is automatic based on key position.

Key Features & Benefits of the Can-Am Dual Battery Kit

Here’s what the upgrade delivers for trails and daily reliability. Automatic control plus a rugged mount and sealed cells keep electronics powered while protecting the starter.

With an 80 amp isolator, sources link Key ON and the starter is isolated Key OFF. Automation prevents accessory drain on the starting battery.

Rugged mounting bracket for vibration and hits

A reinforced bracket anchors components through washboard trails and hard landings. It resists loosening/fatigue so your install stays neat and serviceable.

UTV Stereo Platinum Series AGM: sealed design, maintenance-free, durable

UTV Stereo’s Platinum AGM ships fresh and fully charged. Sealed AGM construction resists spill/vibration and needs no routine maintenance.

Adds extra amp hours vs stock for lights, audio, and accessories

• Gain about 18 amp hours versus stock for longer runtime with lights and audio.
• Steadier loaded voltage preserves audio clarity and lamp brightness at idle.
• The complete battery kit integrates with the factory system for a neat, durable install.

Model Fitment and Options for Can-Am Owners

Select the kit that matches factory mounts and wiring for your model.

Maverick X3 owners get a full 2nd battery kit that includes all wiring and hardware for a turnkey upgrade. If you already own an AGM, the mount-only option from UTV Stereo provides a neat bracket for a tidy install.

Maverick X3: full second-battery kit or dual-mount bracket

Pick a complete kit for fast setup or the bracket-only path when reusing an existing cell. Both approaches aim for a factory look and secure fit.

Defender: tailored 2nd battery kit that fits the stock compartment

The Defender kit is built to fit the stock space and preserve service access. Factory clearances remain intact while adding reliable auxiliary capacity.

Bracket-only and wire kit options if you already own an AGM battery

Cut costs with mount + wiring when you own a spare AGM. You get clean routing and solid mounting without buying extras.

Other Options: DS18 bracket/wire packages and AKJ Offroad kits

• AKJ Offroad offers another full kit option.
• DS18 lists bracket/wire-only packages with free U.S. shipping advertised.
• All are engineered to model geometry for factory-look installs that hold up off-road.

Select a complete kit for convenience or modular parts to integrate existing gear. Clear fitment notes reduce wrong orders and help each customer get the right parts the first time.

In the Box: What You Get

A solid parts list shows exactly what arrives with your purchase and how each piece protects starting power while feeding accessories.

Choose a full package with a secondary agm battery or select the bracket-only route when you already have a compatible cell. Either way preserves the starter and adds usable capacity for lights, audio, and recovery tools.

Core components

• An 80 amp battery isolator relay module to manage charge flow between sources.
• Model-specific harness that reduces splices and speeds installation.
• Distribution hardware with fused connection points for clean accessory feeds.
• Bracket, reinforced, to resist shock and vibration.
• Clear documentation for routing/termination of harness and distribution.

Component	Function	Benefit
Secondary AGM cell	Adds capacity	Starter remains ready during accessory use
80A isolator relay	Manages charge and isolation	Stops accessory drain on starter
Model harness	Connects components	Easier installs and service access
Distribution block & hardware	Fused accessory feeds	Neat fused circuits for lights and audio

Parts are off-road ready and sealed as needed for dust/moisture resistance. It integrates with existing charging/accessory circuits for organized, reliable routing.

Installation Made Straightforward

Simple installation keeps you trail-ready without losing hours in the garage.

Prep a clear workspace and lay out the labeled parts. Install the bracket, seat the second battery, then connect the labeled harness leads.

Simple behavior: Key ON/OFF

With the key ON, the 80A isolator links sources; key OFF keeps the starter isolated. The design routes accessory load to the aux battery, preserving the starter after extended stops.

Secure mounting + clean harness routing

Follow factory paths, use clips, and add abrasion sleeves at pinch points. Use the supplied hardware to make clean grounds and fused distribution points instead of daisy-chaining accessory feeds.

Stage	Action	Why it matters
Mount bracket	Bolt into reinforced points	Maintains clamp load under vibration
Place 2nd cell	Seat and fasten with clamp	Keeps terminals safe and serviceable
Connect harness	Follow labeled leads and fuse points	Makes upgrades and diagnostics easier

Most DIYers can complete the install with basic tools. Amp-rated isolator plus proper cabling stabilize power and protect the starter on long rides.

Performance, Charging & Long-Term Care

Steady power keeps aftermarket UTV electronics performing under heavy loads. With proper charging and routine care, reliability repeats season after season.

Expect steadier voltage and improved performance for audio amps, winches, and high-output lights. The auxiliary AGM trims voltage dips on spikes, keeping sound clean and lights bright.

Prevent sulfation with a charger/maintainer

Use a good maintainer to prevent sulfation, the primary cause of capacity loss in AGM batteries. UTV Stereo recommends topping between trips to preserve capacity and extend life.

• Stock battery health is preserved by isolating starter power Key OFF.
• Running engine alternator replenishes reserves for efficient recharge on long rides.
• Vibration-resistant sealed AGM construction reduces rough-terrain damage.

Aspect	Gain	Action
Performance	Stable voltage under load	Use a new secondary agm to support high-draw accessories
Charging	Less capacity loss over time	Employ a quality charger/maintainer between outings
Long-term care	Longer service life	Pair sealed cells with routine maintenance charging

Pro tip: Keep a suitable maintainer handy to stay topped up. It cuts surprises and preserves next-morning starts on every trip.

Ordering, Support, and Shipping in the U.S.

Quick, dependable shipping helps you schedule installs without surprises.

Fast U.S. shipping plus order support on current inventory

Fast U.S. shipping helps you upgrade your Can-Am quickly. DS18 advertises free shipping on qualifying U.S. orders to speed delivery on lighter packages.

• Responsive support confirms fitment, inventory, and the correct kit for your vehicle.
• Place orders for complete packages or modular solutions — choose full packages or bracket-and-wire options.
• Many bundles include distribution points for accessories, reducing extra parts sourcing and speeding installation.

Clear product info and documentation help you stage tools before delivery. U.S. fulfillment shortens transit so projects stay on schedule.

Area	Coverage	Why it helps
Shipping	Fast domestic transit, DS18 free shipping on select orders	Reduces downtime and gets parts to your garage sooner
Support	Fitment checks and order status for customers	Avoids wrong orders and speeds proper installs
Product options	Full kit or bracket-only/wire-only choices	Pick the solution that matches your power goals and budget

Final Thoughts

Owners seeking steady power with easy install will find this second source delivers. An 80A isolator plus UTV Stereo Platinum AGM adds ~18 amp-hours vs stock and protects starting power.

Select complete kit or bracket-and-wire to fit your budget and schedule. The amp-rated isolator, fused distribution, and clean harness routing make add-ons simple and reliable.

Look for better charging habits, stronger accessory performance, and quick U.S. shipping with helpful support. Use a maintainer with the new auxiliary AGM to preserve life between rides.